Ph. (888) 891-0077 .... Fax (435) 578-4982

Ardrox 6333A Liquid, multi-metal, alkaline cleaner for spray and agitated immersion applications.

PRIMARY APPLICATION

ARDROX 6333A is a liquid, multi-metal, alkaline cleaner for spray and agitated immersion applications. This unique formulation can be used on iron, steel, aluminum, zinc, titanium, copper brass and magnesium when operating within parameters.

ARDROX 6333A has no EDTA-type chelates which can interfere with precipitation waste treatment systems, but it does have sequestrants to reduce scale from hard water salts. Because it is free-rinsing, ARDROX 6333A is ideal for use prior to conversion coating processes.

CHEMICAL CHARACTERISTICS

APPROVALS

ARDROX 6333A is approved by Pratt and Whitney, General Electric and Rolls Royce for all aircraft engines.

ARDROX 6333A conforms to the requirements of AMS 1526B, Boeing D6-17487, Douglas CSD Number 1 and MIL-C-29602 Type I, cleaning compounds for parts washers and spray cabinets. NSN 6850-01-431-2268 (55- gallon drum).

APPLICATION PROCEDURE

Spray: Use ARDROX 6333A in spray washers at between 2 and 10% by volume, 120° to 180° F (49° to 82° C). Exact concentration, temperature and exposure time depend on soils, extent of build-up and conveyor line speed.

Immersion: Use ARDROX 6333A in agitated immersion tanks at 5 - 30% by volume, 140° to 180° F (60° to 82° C). Exact concentration, temperature and immersion time depend on soils and extent of build-up.

For cleaning magnesium, the solution pH should be maintained above 11.

Required Shipping Information

UN3266, CORROSIVE LIQUID, BASIC, INORGANIC, N.O.S., (POTASSIUM HYDROXIDE) 8, III

SAFETY AND HANDLING

Prior to handling and use of any of the materials referenced in this document, the Material Safety Data Sheets should be read and understood by all personnel in contact with these materials. Eyes and skin should be protected with appropriate personal protective equipment. Do not ingest. Eyewash fountains and emergency showers are recommended.

KEEP OUT OF REACH OF CHILDREN

STORAGE

Dry indoor storage at temperatures between 40ºF and 100ºF is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets. All containers should be tightly closed when not in use.

DISPOSAL

Any disposal of the materials referenced in this document should be in accordance with all applicable federal, state, and local regulations. The process solution can contain components other than those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.

ISO 9001:2000 FM 93653

SUGGESTION OF OTHER PRODUCTS YOUR COMPANY MAY USE

•CLEANERS
•ETCHANTS
•DEOXIDIZERS
•RUST PREVENTIVES
•METALWORKING FLUIDS (coolants and lubricants)
•WASTE WATER TREATMENT CHEMICALS
•FLOOR CLEANERS AND MAINTENANCE PRODUCTS
•PROCESS EQUIPMENT/CONTROL SYSTEMS

DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA

Chemetall US, Inc. ("Chemetall") warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own purpose. Since buyer's conditions of use of products are beyond Chemetall's control, Chemetall does not warrant any recommendations and information for the use of such products.

CHEMETALL DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS PRODUCTS.

Please contact us directly for a complete and official Chemetall Technical Data Sheet and/or MSDS in PDF.