Tech Cool® 35048 Chlorine Free
Tech Cool 35048 (5 Gallon) Meets the requirements of Halogen/Chlorine Free
$234.40 Free Shipping
Tech Cool 35048 (52 Gallon) Meets the requirements of Halogen/Chlorine Free
$1,588.00 Free Shipping
Fax Purchase Order to:
For orders more than 1 unit, please contact us for a request for quote.
A Product of Chemetall U.S., Inc.
Tech Cool 35048 is a unique premium machining and grinding fluid developed specifically for applications requiring superior micro-finish on ferrous and aluminum metal substrates. Tech Cool 35048 contains no chlorine, sulfur or phosphorus compounds and is safe on ferrous & aluminum alloys. This product technology uses a unique blend of biological resistant additives which results in exceptional sump life and resistance to microbial contamination. It is DCHA free.
Tech Cool 35048 exhibits enhanced hard water tolerance and increased emulsion stability. The in-service cleanliness of this product allows for long-term system life without the formation of heavy, tacky, water insoluble residues. Tech Cool 35048 is recommended for use in most medium to heavy duty machining and grinding applications. Tech Cool 35048 is exempt under Rule 1144 of the SCAQMD since flashpoint is less than 200 F.
|Chemical composition||semi-synthetic coolant compounds|
|Physical form||Amber liquid|
|Formaldehyde donating biocides||None|
|pH at working concentrations||9|
|Grinding||4 to 6 percent|
|Machining||5 to 12 percent|
INTENDED FOR THE FOLLOW
Tech Cool 35048 is designed to be low foaming in central systems and individual sumps. The product can be mixed directly with water .It is suitable for tapping, reaming, sawing, turning, ID and OD grinding or similar operations. Depending on the operation, Tech Cool 35048 can be diluted from 40:1 to 10:1. Consult your Chemetall Americas representative for the proper use concentration.
Refractometer Readings - Tech Cool 35048 can be measured using a handheld refractometer (0-10 or 0-30 Brix).
Refractometer factor = 1.13
Excellent emulsion stability
Bio-resistant without use of bactericides, DCHA, or secondary amines
Low foaming, suitable for high speed machining
Hard water stable (to 1,200 ppm)
Excellent protection from staining on aluminum, brass and ferrous/iron alloys
Low maintenance requirements
Improved tramp oil rejection designed for extended fluid life and recycling
Low oil misting
The Chemetall Americas Refractometer (0-10 or 0-30 Brix) can be used to measure the refractive index
(Brix) of this product/solution. Water driven proportioners can be used to automatically feed the premixed
solution of this product to the sumps. The Coolant Filter System can be used to filter out sludge, and oils
from the metalworking fluids and help extend the performance of the sump. Please contact the Process Equipment and Engineering Department for specific recommendations.
NOTES OF USE – (see Material Safety Data Sheet)
Always add Tech Cool 35048 to water; never add water to Tech Cool 35048 concentrate.
Safety and Handling:
Prior to handling and use of the material referenced in this document, the Material Safety Data Sheet should be read and understood by all personnel in contact with these materials.
KEEP OUT OF REACH OF CHILDREN
Dry indoor storage at temperatures between 40ºF and 100ºF (4.4ºC and 37.8ºC) is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets. All containers should be tightly closed when not in use.
Any disposal of the materials referenced in this document should be in accordance with all applicable federal, state, providential and local regulations. The process solution can contain components other than those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.
Suggestion Of Other Products Your Company May Use:
Metalworking Fluids(coolants and lubricants)
Waste Water Treatment Chemicals
Floor Cleaners and Maintenance Products
Process Equipment/Control Systems
DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA
Chemetall US, Inc. ("Chemetall") warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own purpose. Since buyer's conditions of use of products are beyond Chemetall's control, Chemetall does not warrant any recommendations and information for the use of such products.
CHEMETALL DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS PRODUCTS.
Please contact us directly for a complete and official Chemetall Technical Data Sheet and/or MSDS in PDF.
Contact us: Office (888) 891-0077
NALTIC Industrials, LLC
299 S Main St Suite 1300
Salt Lake City, UT 84111