A Product of Chemetall US, Inc.

Ardrox 6367 is a liquid alkaline cleaner formulated to clean the compressor sections of gas turbine jet engines.

PRIMARY APPLICATION

Ardrox 6367 is a liquid alkaline product formulated to clean the compressor sections of gas turbine engines. A blend of detergents, it is solvent free and removes atmospheric soils, oils, carbon and salt deposits during `in-situ´ hot-fired and cold motor washes. Ardrox 6367 is safe on all aircraft metal, plastics, windows, etc., and is non-flammable and biodegradable. In addition, it contains an inhibitor which protects the engine components from oxidation and corrosion for up to 3 days. Regular cleaning with Ardrox 6367 helps maintain peak engine efficiency and reduces maintenance and fuel cost. Ardrox 6367 is compatible with recognized antifreeze materials used during cold weather cleaning.

CHEMICAL CHARACTERISTICS

Composition……………….surfactants and corrosion inhibitors
Appearance……………….clear pale yellow solution
Physical form……………..liquid
Flash point………………… > 200 °F
Odor………………………… mild surfactant
Bulk density……………… 8.2 lbs./gal
pH……………………………. 8.0

APPROVALS

Ardrox 6367 meets specification OMat 1070F; D6-17487; C04-140; SPMC 87-10A of Rolls-Royce; Boeing; General Electric and Pratt & Whitney respectively.  Solar Turbines approved.  Specification No. ES 9-62-1

Hot-Fired Wash:

Use Ardrox 6367 at 10 to 20% with demineralized water. Apply by spray; pressure and flow rate will depend upon the engine type and degree of contamination.

Cold Wash:

Use Ardrox 6367 at 10 to 20% with demineralized water. Spray on the surface. After cleaning, there is no need to rinse because Ardrox 6367 will protect the engine from oxidation for up to 3 days.

NOTES ON USE

Always apply Ardrox 6367 according to the procedures given by the engine manufacturer.

SHELF LIFE

The shelf life is 3 years (2 years for aerosols).

SAFETY AND HANDLING

Prior to handling and use of any of the materials referenced in this document, the Material Safety Data Sheets should be read and understood by all personnel in contact with these materials. Eyes and skin should be protected with appropriate personal protective equipment. Do not ingest. Eyewash fountains and emergency showers are recommended.

KEEP OUT OF REACH OF CHILDREN

STORAGE

Dry indoor storage at temperatures between 40 ºF and 100 ºF is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets. All containers should be tightly closed when not in use.

DISPOSAL

Any disposal of the materials referenced in this document should be in accordance with all applicable federal, state, and local regulations. The process solution can contain components other than those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.

TRANSPORTATION for US DOT container size 55 Gal 491 lbs.
•NMFC: NMFC 48581 OR 48580 S3
•Description of goods: CLEANING COMPOUND, NOIBN LIQUID OR POWDER

ISO 9001:2000 FM 93653

SUGGESTION OF OTHER PRODUCTS YOUR COMPANY MAY USE

•CLEANERS
•ETCHANTS
•DEOXIDIZERS
•RUST PREVENTIVES
•METALWORKING FLUIDS (coolants and lubricants)
•WASTE WATER TREATMENT CHEMICALS
•FLOOR CLEANERS AND MAINTENANCE PRODUCTS
•PROCESS EQUIPMENT/CONTROL SYSTEMS

DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA

Chemetall US, Inc. (“Chemetall”) warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own purpose. Since buyer’s conditions of use of products are beyond Chemetall’s control, Chemetall does not warrant any recommendations and information for the use of such products.

CHEMETALL DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE  IN CONNECTION WITH THE USE OF ITS PRODUCTS.

Please contact us directly for a complete and official Chemetall Technical Data Sheet and/or MSDS in PDF.

Contact us: Office (888) 891-0077
email: 411@naltic.com

Headquarters
NALTIC Industrials, LLC
299 S Main St Suite 1300
Salt Lake City, UT 84111
USA