NALTIC Industrials, LLC

Ardrox ® 9PR50

NDT Cleaner/Pentrant Remover

A Product of Chemetall U.S., Inc.

PRIMARY APPLICATION

Ardrox® 9PR50 is a Class 2, Method C, AMS 2644 approved cleaner/remover. It is a quick drying, non-halogenated (non-chlorinated) solvent for removing oil, grease and similar soils from metal surfaces. It provides a high level of cleaning efficiency with operational safety. It is completely corrosion safe for use on both ferrous and non-ferrous alloys. Ardrox® 9PR50 is an excellent penetrant remover.

Physical form Clear, colorless liquid
Bulk density 6.25 lb/gal
Specific gravity 0.74 g/mL
Flash point 52° F (11° C), PMCC
Boiling point 244° F
Vapor pressure 26 mm Hg @ 100° F (38° C)
VOC 740 g/L

Approvals

AMS 2644

ASTM E165

NAVSEA 250-1500-1

ASME Pressure Vessel & Boiler Code

APPLICATION PROCEDURE

Use as received. Cleaning may be by hand wipe, brush, spray or dip. Dwell time will vary slightly depending upon severity of soil being removed. Penetrant removal is done by wiping off excess penetrant with a dry cloth, then dampen a cloth of lint-free tissue with Ardrox® 9PR50 and wipe off remaining penetrant.

Do not flood test surface with cleaner/remover because sensitivity will be impaired.

Use in a well-ventilated area; avoid concentrating vapors. Keep away from heat, sparks, or open flames. Vapors are flammable.

SAFETY AND HANDLING

Prior to handling and use of any of the materials referenced in this document, the Material Safety Data Sheets should be read and understood by all personnel in contact with these materials.

KEEP OUT OF REACH OF CHILDREN

STORAGE

Dry indoor storage at temperatures between 40ºF and 100ºF is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets.
All containers should be tightly closed when not in use.

SHELF LIFE

3 years


ISO 9001:2000 FM 93653

Suggestion Of Other Products Your Company May Use:

• Cleaners

• Etchants

• Deoxidizers

• Rust Preventatives

• Metalworking Fluids(coolants and lubricants)

• Waste Water Treatment Chemicals

• Floor Cleaners and Maintenance Products

• Process Equipment/Control Systems

DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA

Chemetall US, Inc. (“Chemetall”) warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own
purpose. Since buyer’s conditions of use of products are beyond Chemetall’s control, Chemetall does not warrant any recommendations and information for the use of such products.

CHEMETALL DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS PRODUCTS.


Please contact us directly for a complete and official Chemetall Technical Data Sheet and/or MSDS in PDF.

Contact us: Office (888) 891-0077
email: 411@naltic.com

Headquarters
NALTIC Industrials, LLC
299 S Main St Suite 1300
Salt Lake City, UT 84111
USA