Oakite® 33
Oakite 33 is an Acidic Compound for Cleaning, Removing Oxides and Preparing Metals for Painting
Oakite 33 meets the following Federal and Military specifications: TT-C-490, Method Vl, and MIL-C10578, Type 1
5 gal Pail (4 gal total) BASF Number: 50554660 (Request for quote) NSN 8030-00-145-0084
55 gal Drum (53 gal total) BASF Number: 50554656 (Request for quote)
Oakite 33 Four Gallon Pail (15 liters)
Only a few left!
Oakite® 33
$275.45 per four gallon pail. FOB Salt Lake City
A Product of BASF Chemetall US In.
Oakite 33 is an Acidic Compound for Cleaning, Removing Oxides and Preparing Metals for Painting
Oakite 33 meets the following Federal and Military specifications: TT-C-490, Method Vl, and MIL-C10578, Type 1
5 Gallon Pail (4 gal total) BASF Number: 50554660 (NSN 8030-00-145-0084)
55 Gallon Drum (53 gal total) BASF Number: 50554656
For more details, or to order larger quantities.
If out of stock, 7 business day lead time to restock more product.
Please give us a call with any questions. We are always happy to help!
Please note: If using your own FedEx Ground account number, please email us a note 411@naltic.com or call 888.891.0077 and we will apply it to your order.
Without using your own FedEx Shipping account number, which you would need to email to us at 411@naltic.com, the alternative then is to select $120 Shipping HAZMAT fee in the drop-down field.
Primary Application
Oakite® 33 is a liquid acidic compound designed for removing light grease, oils, shop dirt, flux, rust, oxides and heat scale and for preparing metals for painting. It is also used for cleaning and conditioning aluminum prior to surface conversion processing. Another application, recommended by stainless steel manufacturers, is the use of Oakite 33 for cleaning stainless steel to remove dirt and embedded soils in the metal.
|
|
CHEMICAL CHARACTERISTICS
FEATURE | CHARACTERISTIC |
| Chemical composition | Phosphoric acid, solvents and surfactants |
| Physical form | As received: light-amber liquid As used: pale-yellow solution odor |
| Odor | Faintly aromatic |
| Specific gravity (approx) | 1.345 at 20 °C (68 °F) |
| Bulk density | 1345 g/L (11.2 lbs/gal) |
| Viscosity | 34 to 40 cps at 20 °C (68 °F) |
| Brookfield Spindle 1, 60 rpm flash point (undiluted) | None |
| Hygroscopic tendency | Slight |
| Foaming tendency | Moderate when circulated; severe when sprayed |
| Maximum solubility | Complete |
| Behavior in hard water | Solubilizes hard water salts |
| Rinsability | Good with hot water; fair with cold water |
| Sprayed recommended diluent | Water |
| Normal working temperature | 27 to 60 °C (80 to 140 °F) |
| Normal working concentrations | 2 to 50% by volume |
| Cold water biodegradable surfactants | Yes |
| Phosphorous-free | No |
| Effects of prolonged boiling | Loss of solvent |
| pH at working concentrations | Under 2.0 at 21 °C (70 °F) |
Effect of working solutions on metal
Rate of metal loss from a 24-hour immersion in Oakite 33 at 5% by volume, 29 °C (120 °F), projected for one year, is as follows: Rate of Metal Loss
|
Approvals:
Oakite 33 meets the following Federal and Military specifications: TT-C-490, Method Vl, and MIL-C10578, Type 1
Application Procedure:
By tank immersion – use at 5 to 25% by volume at 27 to 60 °C (80 to 140 °F) followed by rinsing and drying.
For Wipe-on-methods – use at 10 to 50% by volume at room temperature. Apply with rags or brushes, allow to soak for 2 to 20 minutes, rinse and wipe dry
Solution Control: Concentrations are titrated using Gardotest Procedure 128. Sample Size: 1.0 mL Factor: 6.5
Safety and Handling:
Prior to handling and use of Oakite 33 the Safety Data Sheet should be read and understood by all personnel in contact with the product.
KEEP OUT OF REACH OF CHILDREN
Disposal:
Any disposal of Oakite 33 should be in accordance with all applicable federal, state, and local regulations.
The process solution can contain components other than those present in the product as supplied. Analysis of the process solution may be required prior to disposal.
Storage:
Dry indoor storage at temperatures between 40 and 100 ºF (4.4 and 37.8 ºC) is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets. All containers should be tightly closed when not in use.
DOT HAZMAT:
UN1805
Phosphoric acid solution
Class 8
Packing Group III
Corrosive
SUGGESTION OF OTHER PRODUCTS YOUR COMPANY MAY USE
• CLEANERS
• ETCHANTS
• DEOXIDIZERS
• RUST PREVENTIVES
• METALWORKING FLUIDS (coolants and lubricants)
• WASTE WATER TREATMENT CHEMICALS
• FLOOR CLEANERS AND MAINTENANCE PRODUCTS
• PROCESS EQUIPMENT/CONTROL SYSTEMS
DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA
Chemetall US, Inc. (“Chemetall”) warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own purpose. Since buyer’s conditions of use of products are beyond Chemetall’s control, Chemetall does not warrant any recommendations and information for the use of such products.
CHEMETALL DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS PRODUCTS.
Please contact us directly for a complete and official Chemetall Technical Data Sheet and/or SDS in PDF.Contact us: Office (888) 891-0077
email: 411@naltic.com
Headquarters
NALTIC Industrials, LLC
299 S Main St Suite 1300
Salt Lake City, UT 84111
USA