Liquid Additive RINSITE

Liquid Additive For Improved Rinsing In Metal Cleaning And Plating Operations; Prevents Water Spotting, Retards Rusting

SKU: 50556118 Category:

Primary Application

1. RINSITE is a liquid additive used in the final stages of metal cleaning and plating (and tumbling) operations to improve rinsing.

2. It makes dry-down uniform, eliminates water spotting and tarnishing, and retains the bright finish of the metal. It leaves an invisible, non-oily film to retard rusting.

​3. Rinsite also may be used to prevent rusting when air testing equipment such as tanks, regulators and compressors.

Chemical Characterstics



Chemical composition Surfactants, inorganic inhibitors
Appearance As Received: Light-yellow liquid
As Used: Clear solution
Odor Bland
Specific Gravaty 1.044 at 20 °C (68 °F)
Bulk Density 1044 g/L at 20 °C (8.7 lb/gal at 68 °F)
Normal working concentrations 1/8 or 1/2 of 1% by volume with water
Normal working temperature 10 to 60 °C (50 to 140 °F)
pH at working concentration 7.0 to 8.0
Viscosity 7 to 10 cps, Brookfield Spindle 1 at 20°C (68°F), 60 rpm
Flash Point None
Foam Tendency High
Recommended Diluents Rinse water
Maximum Solubility Complete
Behavior in Hard Water Aids rinsing
Rinsability Excellent
Biodegradable Surfactants Yes
Phosphate-Free Yes


Rinsite is added to the final rinse of plating or metal cleaning operations at 1/8 to 1/2 of 1% by volume of water. Slightly higher concentrations may be desirable with cold rinse water. Temperatures may vary from 10° to 60°C (50° to 140°F).
The non-oily, rust-retarding film that Rinsite leaves should not be rinsed off of plated work.

Solution Control:

Concentrations are titrated using Gardotest Procedure 52.
Sample Size: 10.0 mL
Factor: 0.18

NOTES ON USE (see Safety Data Sheet)

Avoid contact or mixing with acids.
Safety and Handling Precautions: Rinsite is a mildly alkaline material. Direct contact may cause irritation of eyes. Prolonged skin contact may cause irritation. It may be harmful if swallowed. Do not get in eyes. Avoid prolonged skin contact. Wash thoroughly after handling. Do not take internally.

First Aid in Case of Contact: For eyes, flush with plenty of water for at least 15 minutes. If eyes are irritated, get medical attention. For skin, flush with water. If swallowed, rinse out mouth with water thoroughly. Drink plenty of water. Contact a physician.


Prior to handling and use of any of the materials referenced in this document, the Safety Data Sheets should be read and understood by all personnel in contact with these materials.


Dry indoor storage at temperatures between 40°F and 100°F (4.4°C and 37.8°C) is recommended, away from any incompatible materials referenced in the Safety Data Sheets. All containers should be tightly closed when not in use.


Any disposal of the materials referenced in this document should be in accordance with all applicable federal, state, providential and local regulations. The process solution can contain components other than those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.


There are no reviews yet.

Be the first to review “Liquid Additive RINSITE”

Your email address will not be published. Required fields are marked *