Description
GARDOROL® CP 20 M
GARDOROL® CP 20 M, formerly known as Ryconox 20 M, is a high-flash-point, water-displacing rust preventive designed to provide long-term indoor corrosion protection for ferrous and nonferrous metal parts.
Its water-displacing properties allow the product to be applied to parts that are still wet, helping eliminate separate hot-rinse or drying operations. GARDOROL CP 20 M is suitable for protecting metal parts between manufacturing operations and during indoor storage or shipment.
Protective Film
When applied at full strength, GARDOROL CP 20 M leaves a thin, slightly oily, barium-free protective film that bonds to the metal surface. The film helps inhibit corrosion and rust while also reducing fingertip etching during handling.
The protective coating generally does not interfere with inspection, handling, or assembly. When removal is required, the film can be removed with an alkaline detergent by immersion or brushing. A suitable solvent may be used where an aqueous cleaner is not permitted.
Key Features and Benefits
- Provides long-term indoor corrosion protection
- Suitable for ferrous and nonferrous metals
- Displaces water from wet metal surfaces
- Non-emulsifying and non-staining
- Leaves a thin, slightly oily, barium-free film
- Helps prevent fingertip etching during handling
- Does not normally interfere with inspection, handling, or assembly
- Can be removed with alkaline detergent solutions
- High flash point
- Phosphate-free
- Normally used at room temperature
Typical Applications
GARDOROL CP 20 M is intended for corrosion protection of metal parts between manufacturing operations, during indoor storage, and during shipment. It may be applied to parts after cleaning and rinsing, including parts that remain wet following processing.
Typical uses may include:
- Machined ferrous and nonferrous components
- Metal parts awaiting inspection, assembly, or further processing
- Finished components placed into indoor storage
- Parts requiring temporary protection during shipment
- Applications where water displacement is needed before protective storage
Application Methods
GARDOROL CP 20 M may be applied by:
- Dipping or immersion
- Brushing
- Roll coating
For best results and to extend the useful life of the product, parts should be cleaned and rinsed before treatment.
Working Concentration
GARDOROL CP 20 M is normally used at full strength. Where less durable protection is acceptable, it may be diluted with mineral spirits, kerosene, or a Varsol-type solvent in proportions up to 50% by volume. Dilution will reduce the level and duration of rust protection.
Mix thoroughly before transferring or applying the product.
Typical Coverage
One gallon of GARDOROL CP 20 M may cover approximately 2,000 to 3,400 ft² of metal surface. Actual coverage depends on the application method, surface condition, part geometry, and desired film thickness.
Typical Physical Properties
| Appearance | Brown liquid |
|---|---|
| Odor | Slight petroleum odor |
| Specific gravity | 0.858 at 20 °C (68 °F) |
| Bulk density | 858 g/L, approximately 7.16 lb/gal |
| Flash point | 265 °F (TCC) |
| Viscosity | 5 to 10 cP at 20 °C (68 °F) |
| Normal working concentration | Full strength |
| Normal working temperature | Room temperature |
| Metal compatibility | Applicable to all metals |
| Phosphate-free | Yes |
Testing and Approval
GARDOROL CP 20 M has been tested in accordance with ANSI/ASHRAE Standard 97 using the sealed-glass-tube method for evaluating the chemical stability of materials used in refrigerant systems containing R410A refrigerant.
After 14 days of exposure at 175 °C, the product showed no discoloration on copper, aluminum, or steel coupons. Based on this testing, GARDOROL CP 20 M has been approved for use by Bitzer Scroll.
Process and Equipment Notes
Chemetall metering pumps may be used to feed the product automatically to the point of application. Holding tanks should preferably have a conical or slanted bottom with a drain valve positioned at the lowest point so that water introduced into the product can be removed periodically.
GARDOROL CP 20 M contains no dye and is not expected to change color or stain with age.
Storage
Store indoors in tightly closed containers at temperatures between 40 °F and 100 °F (4.4 °C and 37.8 °C). Keep the product away from incompatible materials identified in the Safety Data Sheet.
Safety and Handling
Read and understand the current Safety Data Sheet before handling or using this product. Appropriate industrial hygiene practices, personal protective equipment, storage controls, and disposal procedures should be followed.
For industrial use only. Keep out of reach of children.
Product characteristics and application recommendations are based on the manufacturer’s technical information. Users should confirm suitability through testing under their own operating conditions.






Reviews
There are no reviews yet.