Tech Cool® 35052CF
Tech Cool 35052CF Is a premium grade, heavy-duty, chlorine free, semi-synthetic metalworking fluid, designed to machine and grind difficult-to-machine materials. Meets BAC5008 usage areas 2, 5 & 6 (Area 2 is a PSD 6-136 of BAC-5008)
A Product of Chemetall U.S., Inc.
PRIMARY APPLICATION
Tech Cool® 35052CF is a Generation V, heavy-duty, bio-resistant premium grade semi-synthetic metal working fluid designed for machining and grinding. Tech Cool 35052CF is specifically formulated for those facilities machining aluminum, titanium, inconel and other difficult to machine alloys, but fully compatible with all substrates, making it ideal for multi-metal systems.
Tech Cool 35052CF achieves the ideal blend of high lubricity with unsurpassed micro-emulsion stability resulting is aerospace performance levels with exceptional sump life. Tech Cool 35052CF is formulated to provide protection against the growth of bacteria. This product has no bactericides, no DCHA nor are there any other secondary amines. The high detergency components aid in system cleanliness, minimal residues and reduced consumption. Tech Cool 35052CF is low foaming, provides superior corrosion resistance and rejects tramp oils effectively. Meets BAC5008 area 2, 5,& 6 (Area 2 is a PSD 6-136 of BAC5008)
CHEMICAL CHARACTERISTICS
FEATURE |
CHARACTERISTIC |
Chemical composition | Petroleum based |
Physical form | Amber liquid |
Odor | Mild |
Water solubility | Emulsifies |
Sulfur | None |
Chlorine | None |
Formaldehyde donating biocides | None |
Foaming tendency | Low |
pH at working concentrations | 9 |
APPLICATION CONCENTRATION
Grinding | 4 to 6 percent |
Machining | 5 to 12 percent |
INTENDED FOR THE FOLLOW
Tech Cool 35052CF is safe for use on Stainless Steels, Inconels, Hastalloy, and other ferrous alloys. It is
also safe for use on aluminum and aluminum alloys as well as 356 and 380 series cast aluminum.
Tech Cool 35052CF is designed to be mixed directly with water and is suitable for tapping, reaming,
sawing, turning, ID and OD grinding or similar operations.
SOLUTION CONTROL
Refractometer Readings – Tech Cool 35052CF can be measured using a handheld refractometer (0-10 or
0-30 Brix).
Refractometer factor = 1.13
PRODUCT BENEFITS
Excellent emulsion stability
Bio-resistant without use of bactericides, DCHA, or secondary amines
Low foaming, suitable for high speed machining
Hard water stable (to 1,200 ppm)
Excellent protection from staining on aluminum, brass and ferrous/iron alloys
Low maintenance requirements
Improved tramp oil rejection designed for extended fluid life and recycling
Low oil misting
Meets BAC5008
EQUIPMENT
The Chemetall Americas Refractometer (0-10 or 0-30 Brix) can be used to measure the refractive index
(Brix) of this product/solution. Water driven proportioners can be used to automatically feed the premixed
solution of this product to the sumps. The Coolant Filter System can be used to filter out sludge, and oils
from the metalworking fluids and help extend the performance of the sump. Please contact the Process Equipment and Engineering Department for specific recommendations.
NOTES OF USE – (see Material Safety Data Sheet)
Always add Tech Cool 35052CF to water; never add water to Tech Cool 35052CF concentrate.
Safety and Handling:
Prior to handling and use of the material referenced in this document, the Material Safety Data Sheet
should be read and understood by all personnel in contact with these materials.
KEEP OUT OF REACH OF CHILDREN
Storage:
Dry indoor storage at temperatures between 40 ºF and 100 ºF (4.4 ºC and 37.8 ºC) is recommended, away
from any incompatible materials referenced in the Material Safety Data Sheets. All containers should be
tightly closed when not in use.
Disposal:
Any disposal of the materials referenced in this document should be in accordance with all applicable
federal, state, providential and local regulations. The process solution can contain components other than
those present in the materials as supplied. Analysis of process solutions may be required prior to
disposal.
Suggestion Of Other Products Your Company May Use:
Cleaners
Etchants
Deoxidizers
Rust Preventatives
Metalworking Fluids(coolants and lubricants)
Waste Water Treatment Chemicals
Floor Cleaners and Maintenance Products
Process Equipment/Control Systems
DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA
Chemetall US, Inc. (“Chemetall”) warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own
purpose. Since buyer’s conditions of use of products are beyond Chemetall’s control, Chemetall does not warrant any recommendations and information for the use of such products.
CHEMETALL DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS PRODUCTS.
Please contact us directly for a complete and official Chemetall Technical Data Sheet and/or MSDS in PDF.
Contact us: Office (888) 891-0077
email: 411@naltic.com
Headquarters
NALTIC Industrials, LLC
299 S Main St Suite 1300
Salt Lake City, UT 84111
USA